3 Key Reasons Your Toilet Keeps Running.
You know it's time to look up some repair tutorials when your toilet breaks down, and a constantly running toilet water is a major cause for alarm. However, as frustrating as it may be, here are a few explanations and solutions that will help if you experience a toilet that won’t stop running.
The Toilet Flapper Is Malfunctioning
A toilet flapper is a seal that stops water from continually flowing into the bowl. A chain connected to the flapper pulls it open and releases the water when you flush the toilet. To check if the flapper has a problem:
Turn off the water supply to the bathroom.
Lift the lid and peek inside.
If it is faulty, replace it with a new one.
The other reason the flapper might be malfunctioning is that the handle connected to it is stuck in position, causing water to flow continually.
Floater Problems
The refill tube has an attached floater that cuts off the water supply once it reaches a certain level. It is made of plastic to allow it to rise with the water. The problem occurs when the floater is higher than the water level, causing the water to continue flowing in even after the tank is full. When this happens, lower the floater to the correct height to stop water from entering the overflow valve.
It's important to note that the floater may also stop rising with the water. This problem could be due to water in the floater or a malfunctioning component in the system that would require professional attention.
The Refill Tube Is Faulty
The refill tube is responsible for filling up the tank upon flushing the toilet. However, if the water keeps flowing, it could be faulty. You can solve this issue by doing the following:
The length of the refill tube - if it is too long, it needs to be shortened.
Incorrect positioning - reposition the tube in the overflow valve.
Since knowing how to spot the issue or carrying out DIY repairs can be a daunting task, here's where our team from A R Engh comes in. Get in touch with us for more info on the services we offer.